Security Menu - Kontron speedMOPSlcdCE User Manual

Security Menu

24.5
Feature
Supervisor Password is
User Password is
Set User Password *
Set Supervisor
Password *
Diskette access
Fixed disk boot sector
Virus check reminder
System backup
reminder
Password on boot
Notes: In the Option column, bold shows default settings.
(*) Enabling Supervisor Password requires a password for entering Setup.
Passwords are not case sensitive.
User and Supervisor passwords are related. A User password is possible
only if a Supervisor password exists.
Appendix B: BIOS Operation
Option
Clear
Set
Clear
Set
Up to seven alphanumeric
characters
Up to seven alphanumeric
characters
User
Supervisor
Normal
Write protected
Disabled
Daily
Weekly
Monthly
Disabled
Daily
Weekly
Monthly
Disabled
Enabled
68
Description
Displays whether password is set.
Displays whether password is set.
Pressing <Enter> displays the dialog
box for entering the user password.
In rel ated systems, this password
gives restricted access to setup.
Pressing <Enter> displays the dialog
box for entering the user password.
In rel ated systems, this password
gives full access to setup.
Enabled requires supervisor
password to access floppy disk.
Write protect the boot sector on the
hard disk for virus protection.
Requires a password to format or
Fdisk the hard disk.
Displays a message during boot-up
asking (Y/N) if you backed up the
system or scanned for viruses.
Message returns on each boot until
you r espond with Y.
Daily displays the message on the
first boot of the day, Weekly on the
first boot after Sunday, and monthly
on the first boot of the month.
Displays a message during boot-up
asking (Y/N) if you backed up the
system or scanned for viruses.
Message returns on each boot until
you r espond with Y.
Daily displays the message on the
first boot of the day, Weekly on the
first boot after Sunday, and monthly
on the first boot of the month.
Enabled requires a password on
boot. Requires prior setting of the
supervisor password.
If supervisor password is set and this
option is disabled, BIOS assumes
user is booting.
speedMOPSlcdCE User's Guide
KONTRON