Master Or Slave Submenus - Kontron speedMOPSlcdCE User Manual

KONTRON

Master or Slave Submenus

24.3.1.
Feature
Type
Cylinders
Heads
Sectors
Maximum Capacity
Total Sectors
Maximum Capacity
Multi -Sector Transfer
LBA Mode Control
32-Bit I/O
Transfer Mode
Ultra DMA Mode *
SMART Monitoring
Note: In the Option column, bold shows default settings.
(*) The board only supports up to UDMA33. This is a limitation from the
44pin IDE interfaces.
speedMOPSlcdCE User's Guide
Option
None None = Autotyping is not able to supply the drive
User type or end user has selected None, disabling any
Auto
CD-ROM User = End user supplies HDD information.
IDE Removable Auto = Autotyping. The drive itself supplies the
ATAPI Removable
Other ATAPI
ATAPI Removable = Read- and writeable media
Other ATAPI = for ATAPI devices not supported by
1 to 65,536
1 to 256
1 to 63
N/A Displays the calculated size of the drive in CHS.
N/A Number of total sectors in LBA mode.
N/A Displays the calculated size of the drive in LBA.
Disabled Any selection except Disabled determines the
2 sectors number of sectors transferred per block.
4 sectors The standard is one sector per block.
8 sectors
16 sectors
Disabled Enabling LBA causes Logical Block Addressing to
Enabled
Disabled Enables 32-bit communication between CPU and
Enabled IDE card. Requires PCI or local bus.
Standard Selects the method for transferring the data
Fast PIO 1 between the hard disk and system memory.
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
Disabled Selects the UDMA mode to move data to/from the
MODE 0 drive. Autotype the drive to select the optimum
MODE 1 transfer mode. This feature is autodetected.
MODE 2
Disabled Shows whether a disk supports SMART.
Enabled
59
Description
drive that may be installed.
information.
CD- ROM = CD-ROM drive.
e.g. LS120 and USB- ZIP
other HDD features.
Number of cylinders.
Number of read/write heads.
Number of sectors per track.
be used in place of CHS.
Appendix B: BIOS Operation