Kontron 886LCD-M/ATX User Manual
  1. Manuals
  2. Brands
  3. Kontron Manuals
  4. Motherboard
  5. 886LCD-M/ATX
  6. User manual
Kontron 886LCD-M/ATX User Manual

Kontron 886LCD-M/ATX User Manual

Hide thumbs Also See for 886LCD-M/ATX:
Table of Contents

Advertisement

Quick Links

See also: User Manual
886LCD-M Family
KTD-00474-E
Public

User Manual

Date: 2005-05-24
Page
1 of 78
User Manual
for the Mother Boards:
886LCD-M/ATX
886LCD-M/Flex
886LCD-M/mITX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 886LCD-M/ATX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kontron 886LCD-M/ATX

Summary of Contents for Kontron 886LCD-M/ATX

  • Page 1: User Manual

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 1 of 78 User Manual for the Mother Boards: 886LCD-M/ATX 886LCD-M/Flex 886LCD-M/mITX...

  • Page 2: Document Revision History

    Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer: KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance.

  • Page 3: Life Support Policy

    KONTRON Technology Technical Support and Services If you have questions about installing or using your KONTRON Technology Product, check this User’s Manual first – you will find answers to most questions here. To obtain support, please contact your local Distributor or Field Application Engineer (FAE).

  • Page 4: Table Of Contents

    Recommended Power Supply specifications ................18 886LCD-M Clock Distribution ......................19 CONNECTOR DEFINITIONS........................21 Connector layout..........................22 4.1.1 886LCD-M/Flex...........................22 4.1.2 886LCD-M/ATX ..........................23 4.1.3 886LCD-M/mITX.........................24 Power Connector (ATXPWR) ......................24 Power Connector (ATXPWR) ......................25 Keyboard and PS/2 mouse connectors ..................26 4.3.1 Stacked MINI-DIN keyboard and mouse Connector (MSE & KBD) ...........26 4.3.2...
  • Page 5 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 5 of 78 Printer Port Connector (PRINTER)....................38 Serial Ports ............................39 4.8.1 Serial Port ComA DB9 Connector....................39 4.8.2 Serial Port ComB, ComC & ComD Pin Header Connectors............39 Ethernet connectors........................40 4.9.1 Ethernet connector 1 (ETHER1)....................40 4.9.2...
  • Page 6 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 6 of 78 8.3.3 Advanced settings – LAN Configuration..................60 8.3.4 Advanced settings – Floppy Configuration.................61 8.3.5 Advanced settings – SuperIO Configuration ................62 8.3.6 Advanced settings – Hardware Health Configuration ..............63 8.3.7 Advanced settings –...

  • Page 7: Introduction

    This manual describes the 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX boards made by KONTRON Technology A/S. The boards will also be denoted 886LCD family if no differentiation is required. All boards are to be used with the Intel® Pentium® M & Intel Celeron® M Processors.

  • Page 8: Installation Procedure

    2. Installation procedure 2.1 Installing the board To get the board running, follow these steps. In some cases the board shipped from KONTRON Technology has CPU, DDR DRAM and Cooler mounted. In this case Step 2-4 can be skipped. 1. Turn off the power supply.

  • Page 9: Requirement According To En60950

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 9 of 78 2.2 Requirement according to EN60950 Users of 886LCD boards should take care when designing chassis interface connectors in order to fulfill the EN60950 standard: When an interface/connector has a VCC (or other power) pin, which is directly connected to a power plane like the VCC plane: To protect the external power lines of peripheral devices the customer has to take care about: •...

  • Page 10: System Specification

    Date: 2005-05-24 Page 10 of 78 3. System specification 3.1 Component main data The table below summarises the features of the 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX embedded motherboards. Form factor 886LCD-M/Flex: Flex-ATX (190,50millimeters by 228,60millimeters) 886LCD-M/ATX: ATX (190,50millimeters by 304,00millimeters) 886LCD-M/mITX: mini ITX (170.18millimeters by 170.18millimeters) •...
  • Page 11 PXE and RPL netboot supported. Wake On LAN (WOL) supported. • BIOS Kontron Technology / AMI BIOS (core version) • Support for Advanced Configuration and Power Interface (ACPI 1.0, 2.0), Plug and Play Suspend To Ram...
  • Page 12 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 12 of 78 Environmental Operating: Conditions 0°C – 60°C operating temperature (forced cooling). It is the customer’s responsibility to provide sufficient airflow around each of the components to keep them within allowed temperature range.

  • Page 13: Processor Support Table

    Page 13 of 78 3.2 Processor support table. 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX boards are designed to support the following processors: Intel® Pentium® M Processor, 130 nm process with 1 MB L2 cache Intel® Pentium® M Processor, 90 nm process with 2 MB L2 cache Intel®Celeron®...

  • Page 14: System Overview

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 14 of 78 3.4 System overview The block diagram below shows the architecture and main components of the 886LCD boards. The two key ® ® components on the board are the Intel 855GME and Intel 6300ESB (ICH(S)) Embedded Chipsets.

  • Page 15: 886Lcd-M Power Distribution & Power State Map

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 15 of 78 3.5 886LCD-M Power Distribution & Power State Map ATX PSU Battery or +V3.3_ALWAY +V_RTC Ref.: ATXPWR Ref.: +V5_ALWAYS +V5S +V3.3S VCC12 VCC-12 BT1II VCC-12 VCC12 LDO Regulator +V1.8S Ref.
  • Page 16 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 16 of 78 +VCC_CORE Processor +VCCP Ref.: +V1.8S BANIAS_ +VCCP +V5S +V1.2S North Bridge +V3.3S +V1.5S Ref.: VCC12 +V2.5 GMCH_ VCC-12 +V3.3S +V1.8S +VCC_CORE +VCCP +V5S +V1.2S +V3.3S +V1.5S +V1.5S +V2.5 +VCCP South Bridge +V1.25S...

  • Page 17: Power Consumption

    3.6 Power Consumption This section lists a summary of the power consumption of the 886LCD-M Boards. For additional details, please refer to the Power Supply Characteristics document available from Kontron Technology. The idle/full power consumption of the 886LCD-M is measured under: 1- DOS prompt idle/full CPU load.

  • Page 18: Power Consumption, Total

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 18 of 78 3.6.3 Power Consumption, Total 886LCD-M board (3x1GB LAN) with Pentium M 1600/400MHz (1MB L2 Cache), 256MB DDR RAM (333MHz) Power State CPU Speed Power consumption Full load 1600Mhz 37.0W Idle 1600Mhz...

  • Page 19: 886Lcd-M Clock Distribution

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 19 of 78 3.7 886LCD-M Clock Distribution HO ST CLO C K PAIR S CLK_CPU_BC LK & CLK_CPU_BC LK# 100M H z Processor CLK_ITP_CPU & CLK_ITP_CPU# R ef.: Banias_ 100M H z CLK_M CH_BCLK &...
  • Page 20 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 20 of 78 C R T V G A R ef.: C R T _C O M A _ LP T _ D D R M em o ry D A C _ D D C A C LK R ef.: D D R 0, M _C LK _ D D R X &...

  • Page 21: Connector Definitions

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 21 of 78 4. Connector Definitions The following sections provide pin definitions and detailed description of all on-board connectors. The connector definitions follow the following notation: Column Description name Shows the pin-numbers in the connector. The graphical layout of the connector definition tables is made similar to the physical connectors.

  • Page 22: Connector Layout

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 22 of 78 4.1 Connector layout 4.1.1 886LCD-M/Flex IDE_S2 SATA0 IDE_S DDR1 DDR0 SATA1 FRONTPNL IDE_P Clr-CMOS FAN_SYS LVDS AGP/DVO ATXPWR FEATURE CDROM COMD PCI SLOT 3 COMC PCI SLOT 2 COMB PCI SLOT 1 AUDIO HEADER...

  • Page 23: 886Lcd-M/Atx

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 23 of 78 4.1.2 886LCD-M/ATX IDE_S2 IDE_S SATA0 DDR1 DDR0 IDE_P SATA1 FRONTPNL Clr-CMOS FAN_SYS AGP/DVO LVDS ATXPWR CDROM FEATURE PCI SLOT 6 PCI SLOT 5 COMD PCI SLOT 4 PCI SLOT 3...

  • Page 24: 886Lcd-M/Mitx

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 24 of 78 4.1.3 886LCD-M/mITX CF (backside of 886LCD-M/mITX) FAN_SYS Clr-CMOS IDE_S2 SATA0 FRONTPNL LVDS FEATURE IDE_P SATA1 DDR0 AGP/DVO KBDMSE AUDIO CDROM ATXPWR COMD COMC ETHER2 COMB ETHER3 ETHER1 LINE-IN USB0 FAN_PROC LINE-OUT...

  • Page 25: Power Connector (Atxpwr)

    KTD-00474-E Public User Manual Date: 2005-05-24 Page 25 of 78 Power Connector (ATXPWR) The 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX is designed to be supplied from a standard ATX power supply. Power Connector 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX Pull Pull Note Ioh/Iol Type...

  • Page 26: Keyboard And Ps/2 Mouse Connectors

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 26 of 78 4.3 Keyboard and PS/2 mouse connectors Attachment of a keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector (MSE & KBD). Both interfaces utilize open-drain signaling with on-board pull-up.

  • Page 27: Display Connectors

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 27 of 78 4.4 Display Connectors The 886LCD board family provides onboard two basic types of interfaces to a display: Analog CRT interface and a digital interface typically used with flat panels. The digital interface to flat panels can be achieved through the onboard LVDS dual channel interface and/or the DVO port available on the AGP connector.

  • Page 28: Lvds Flat Panel Connector (Lvds)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 28 of 78 4.4.2 LVDS Flat Panel Connector (LVDS) Note Type Signal Signal Type Note +12V +12V +12V +12V +12V LCDVCC LCDVCC DDC CLK DDC DATA BKLTCTL VDD ENABLE BKLTEN LVDS LVDS A0- LVDS A0+ LVDS...

  • Page 29: Agp/Dvo Connector

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 29 of 78 4.4.3 AGP/DVO connector Note Type Signal Signal Type Note OVRCNT +12V TYPEDET RSVD USB+ USB- INTB INTA AGPCLK RST- GREQ GGNT +3.3V +3.3V RSVD PIPE RSVD ADD_ID0 ADD_ID1 +3.3V +3.3V ADD_ID2...
  • Page 30 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 30 of 78 Signal Description – AGP Connector: Signal Description Address PIPE# Pipelined Read: This signal is asserted by the AGP master to indicate a full width address is to be enqueued on by the target using the AD bus. One address is placed in the AGP request queue on each rising clock edge while PIPE# is asserted.
  • Page 31 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 31 of 78 AGP/PCI Signals-Semantics FRAME# G_FRAME: Frame. During PIPE# and SBA Operation: Not used by AGP SBA and PIPE# operations. During Fast Write Operation: Used to frame transactions as an output during Fast Writes.
  • Page 32 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 32 of 78 CBE#[3:0] Command/Byte Enable. During FRAME# Operation: During the address phase of a transaction, the G_CBE[3:0]# signals define the bus command. During the data phase, the G_CBE[3:0]# signals are used as byte enables.

  • Page 33: Parallel Ata Harddisk Interface

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 33 of 78 4.5 Parallel ATA harddisk interface Two parallel ATA harddisk controllers are available on the board – a primary and a secondary controller. Standard 3½” harddisks or CD-ROM drives may be attached to the primary and secondary controller board by means of the 40 pin IDC connectors, IDE_P and IDE_S.

  • Page 34: Ide Hard Disk Connector (Ide_P)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 34 of 78 4.5.1 IDE Hard Disk Connector (IDE_P) This connector can be used for connection of two primary IDE drives. Pull Pull Note Ioh/Iol Type Signal Signal Type Ioh/Iol Note RESETA# /10K DA10...

  • Page 35: Ide Hard Disk Connector (Ide_S2)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 35 of 78 4.5.3 IDE Hard Disk Connector (IDE_S2) This connector (44-pin 2.0 mm pitch) can be used for connection of up till two secondary IDE drives, but only if no drive(s) is installed via IDE_S socket. Pull Pull Note...

  • Page 36: Cf Connector (Cf)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 36 of 78 4.5.4 CF Connector (CF) This connector is mounted on the backside of the 886LCD-M/mITX only. If a Compact Flash Disk is used, then no IDE drive can be connected to the IDE_S2 connector. The socket support DMA/UDMA modules. Pull Pull Note...

  • Page 37: Serial Ata Harddisk Interface

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 37 of 78 4.6 Serial ATA harddisk interface Two serial ATA harddisk controllers are available on the board – a primary controller (SATA0) and a secondary controller (SATAB). 4.6.1 SATA Hard Disk Connector (SATA0, SATA1) SATA0: Pull Signal...

  • Page 38: Printer Port Connector (Printer)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 38 of 78 4.7 Printer Port Connector (PRINTER). The printer port connector is provided in a standard DB25 pinout. The signal definition in standard printer port mode is as follows: Pull Pull Note Ioh/Iol...

  • Page 39: Serial Ports

    Date: 2005-05-24 Page 39 of 78 4.8 Serial Ports Four RS232C serial ports are available on the 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX. The typical interpretation of the signals in the COM ports is as follows: Signal Description Transmitte Data, sends serial data to the communication link. The signal is set to a marking state on hardware reset when the transmitter is empty or when loop mode operation is initiated.

  • Page 40: Ethernet Connectors

    Page 40 of 78 4.9 Ethernet connectors. The 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX boards supports 3 channels of 10/100/1000Mb Ethernet. In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with 10/100MB and Category 5E, 6 or 6E with 1Gb LAN networks.

  • Page 41: Ethernet Connector 2/3 (Ether2/3)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 41 of 78 4.9.2 Ethernet connector 2/3 (ETHER2/3) The two Ethernet channels in ETHER2/3 are supported by two discrete Ethernet controllers (RTL8110SB) connected to the onboard PCI bus. This connector is not supported on the Engineering sample boards. The pinout of the RJ45’s connector are as follows: Signal Type...

  • Page 42: Usb Connector (Usb)

    42 of 78 4.10 USB Connector (USB) The 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX contains two USB (Universal Serial Bus) ports UHCI Host Controllers. Each Host Controller includes a root hub with two separate USB ports each, for a total of 4 USB ports.

  • Page 43: Audio Connector

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 43 of 78 4.11 Audio Connector 4.11.1 Audio Line-in, Line-out and Microphone Audio Line-in, Line-out and Microphone are available in the stacked audio jack connector. Signal Type Note MIC 1 1, 2 RING MIC 2 1, 2...

  • Page 44: Audio Header (Audio_Head)

    25 26 Signal Description Low Frequency Effect Out channel. AMP-LFE-OUT On 886LCD-M/ATX and M/Flex signal is amplified to 3W. On 886LCD-M/mITX signal is un-amplified. Center Out channel. AMP-CEN-OUT On 886LCD-M/ATX and M/Flex signal is amplified to 3W. On 886LCD-M/mITX signal is un-amplified.

  • Page 45: Fan Connectors , Fan_Proc And Fan_Sys

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 45 of 78 4.12 Fan connectors , FAN_PROC and FAN_SYS. The FAN_PROC is used for connection of the active cooler for the CPU. The FAN_SYS can be used to power, control and monitor a fan for chassis ventilation etc. Pull Signal Type...

  • Page 46: Front Panel Connector (Frontpnl)

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 46 of 78 4.15 Front Panel connector (FRONTPNL). Pull Pull Note Ioh/Iol Type Signal Signal Type Ioh/Iol Note USB13_5V USB13_5V USB1- USB3- USB1+ USB3+ 11 12 HD_LED 13 14 SUS_LED 15 16 PWRBTN_IN# RSTIN# 17 18...

  • Page 47: Feature Connector (Feature)

    The external battery voltage shall be in the range: 2.5 - 4.0 V DC. General Purpose Inputs / Output. These Signals may be controlled or monitored through GPIO0..7 the use of the KONTRON API (Application Programming Interface) available for Win98, WinXP, WinNT, and Win2000. FAN3OUT FAN 3 speed control OUTput.

  • Page 48: Pci Slot Connector

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 48 of 78 4.17.1 PCI Slot Connector Terminal Note Type Signal Signal Type Note -12V TRST# +12V INTA# INTB# INTC# INTD# REQ2# CLKC REQ3# +5V (I/O) GNT2# CLKD CLKA GNT3# RST# CLKB +5V (I/O) GNT0#...

  • Page 49: Signal Description -Pci Slot Connector

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 49 of 78 4.17.2 Signal Description –PCI Slot Connector SYSTEM PINS Clock provides timing for all transactions on PCI and is an input to every PCI device. All other PCI signals, except RST#, INTA#, INTB#, INTC#, and INTD#, are sampled on the rising edge of CLK and all other timing parameters are defined with respect to this edge.

  • Page 50: 886Lcd-M Pci Irq & Int Routing

    INT_PIRQ#E INT_PIRQ#F INT_PIRQ#G INT_PIRQ#H 886LCD-M/FLEX AD16 INT_PIRQ#E INT_PIRQ#F INT_PIRQ#G INT_PIRQ#H AD17 INT_PIRQ#F INT_PIRQ#G INT_PIRQ#H INT_PIRQ#E AD18 INT_PIRQ#G INT_PIRQ#H INT_PIRQ#E INT_PIRQ#F 886LCD-M/ATX AD16 INT_PIRQ#E INT_PIRQ#F INT_PIRQ#G INT_PIRQ#H AD17 INT_PIRQ#F INT_PIRQ#G INT_PIRQ#H INT_PIRQ#E AD18 INT_PIRQ#G INT_PIRQ#H INT_PIRQ#E INT_PIRQ#F AD19 INT_PIRQ#H INT_PIRQ#E INT_PIRQ#F...

  • Page 51: Onboard Connectors

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 51 of 78 5. Onboard Connectors Connector Manufacturer Type no. FAN_SYS, Molex 22-23-2031 FAN_PROC 640456-3 KBDMSE Molex 22-23-2061 640456-6 CDROM Foxconn HF11040 103669-3 Topyang 201904-013218N SATA0 Molex 67491-0010 SATA1 Foxconn LD18071-S04 PWR12CON Molex 39-29-3046...

  • Page 52: System Ressources

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 52 of 78 6. System Ressources 6.1 Memory map Address range (hex) Size Description 00000000- 0007FFFF 512 Kbytes Conventional memory 00080000- 0009FBFF 127 Kbyte Extended conventional memory 0009FC00- 0009FFFF 1 Kbyte Extended BIOS data 000A0000- 000AFFFF...

  • Page 53: Interrupt Usage

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 53 of 78 6.3 Interrupt Usage Notes • • IRQ0 • IRQ1 • IRQ2 • • • • • 1, 2 IRQ3 • • • • • 1, 2 IRQ4 • •...

  • Page 54: I/O Map

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 54 of 78 6.4 I/O Map Address (hex) Size Description 0020- 0021 Programmable interrupt controller 0040- 0043 System Timer 0060- 0060 Standard keyboard 0061- 0061 System speaker 0070- 0071 System CMOS/Real time clock 0170- 01F7 Secondary Parallel ATA IDE Channel...

  • Page 55: Overview Of Bios Features

    7. Overview of BIOS features This Manual section details specific BIOS features for the 886LCD-M boards. The 886LCD-M boards are based on the AMI BIOS core version ?? with Kontron BIOS extensions. 7.1.1 System Management BIOS (SMBIOS / DMI) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network.

  • Page 56: Bios Configuration / Setup

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 56 of 78 8. BIOS Configuration / Setup 8.1 Introduction The BIOS Setup is used to view and configure BIOS settings for the 886LCD-M board. The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.

  • Page 57: Advanced Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 57 of 78 8.3 Advanced Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Configure CPU. Advanced Settings Warning: Setting wrong values in below sections May cause system to malfunction. >...

  • Page 58: Advanced Settings - Ide Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 58 of 78 8.3.2 Advanced settings – IDE Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit IDE Configuration Select IDE Mode. IDE Configuration [P-ATA Only] P-ATA Only: S-ATA Running Enhanced [Yes] 4 P-ATA &...
  • Page 59 886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 59 of 78 Feature Options Description ATA(PI) 80Pin Cable Detection Host & Device, Select the mechanism for detecting 80Pin ATA Cable Host, Device P-ATA1 Cable Detection Force Disable, 40Pin, 80Pin Force the board to operate as if a 40Pin ATA cable or 80Pin ATA cable is installed on the Primary channel P-ATA2 Cable Detection Force...

  • Page 60: Advanced Settings - Lan Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 60 of 78 DMA Mode Auto, SWDMA0, SWDMA1, Selects the Ultra DMA mode used for SWDMA2, MWDMA0, moving data to/from the drive. Autotype the drive to select the optimum transfer MWDMA1, MWDMA2, UDMA0, UDMA1, UDMA2, UDMA3, mode.

  • Page 61: Advanced Settings - Floppy Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 61 of 78 8.3.4 Advanced settings – Floppy Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Floppy Configuration Select the type of floppy drive connected Floppy A [Disabled] to the system Floppy B...

  • Page 62: Advanced Settings - Superio Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 62 of 78 8.3.5 Advanced settings – SuperIO Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Configure Win627THF Super IO Chipset Enable onboard Floppy Controller for use at OnBoard Floppy Controller [Disabled] parallel port...

  • Page 63: Advanced Settings - Hardware Health Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 63 of 78 8.3.6 Advanced settings – Hardware Health Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enable Hardware Health Hardware Health Event Monitoring Monitoring Device. System Temperature :37ºC/98ºF CPU Temperature :43ºC/109ºF...

  • Page 64: Advanced Settings - Acpi Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 64 of 78 8.3.7 Advanced settings – ACPI Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enable Hardware Health ACPU Settings Monitoring Device. ACPI Aware O/S [Yes] >...

  • Page 65: Advanced Settings - Advanced Acpi Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 65 of 78 8.3.9 Advanced settings – Advanced ACPI Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enable RSDP pointers Advanced ACPI Configuration to 64-bit Fixed System ACPI 2.0 Features [No] Description Tables.

  • Page 66: Advanced Settings - Usb Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 66 of 78 Feature Options Description Remote Access Allows you to see the screen over the Disabled, Enabled comport interface, in a terminal window Serial port number SIO COMA, SIO Setup which comport that should be used for COMB, ICH COM1, communication ICH COM2...

  • Page 67: Advanced Settings - Usb Mass Storage Device Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 67 of 78 8.3.12 Advanced settings – USB Mass Storage Device Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enables USB host USB Mass Storage Device Configuration controllers.

  • Page 68: Pcipnp Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 68 of 78 8.4 PCIPnP Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Advanced PCI/PnP Settings NO: lets the BIOS configure all the Warning: Setting wrong values in below sections devices in the system.

  • Page 69: Boot Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 69 of 78 8.5 Boot Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Configure Settings Boot Settings during System Boot. > Boot Settings Configuration > Boot Device Priority Removable Devices 1st [No] <-...

  • Page 70: Security Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 70 of 78 Feature Options Description Quick Boot Allows BIOS to skip certain test while booting Enabled, Disabled Quiet Boot Shows boot logo instead of POST screen Disabled, Enabled, Enabled & Maintain Bootup Num-Lock Off, On Select Power-on state for numlock...

  • Page 71: Chipset Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 71 of 78 8.7 Chipset Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Intel Montara-GML Advanced Chipset Settings NorthBridge chipset configuration options. Warning: Setting wrong values in below sections may cause system to malfunction.

  • Page 72: Advanced Chipset Settings - Intel Montara-Gml Northbridge Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 72 of 78 8.7.1 Advanced Chipset Settings – Intel Montara-GML NorthBridge Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Select which graphics Configure advanced settings for NorthBrigde controller to use as Primary Video Device [Auto]...

  • Page 73: Advanced Chipset Settings - Southbridge Configuration

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 73 of 78 8.7.2 Advanced Chipset Settings – SouthBridge Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enable / Disable the ICH4 IOAPIC function. IOAPIC [Enabled] Extended IOAPIC [Enabled] OnBoard AC’97 Audio [Enabled]...

  • Page 74: Power Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 74 of 78 8.8 Power Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Enable/Disable SMI based power management ADVANCED SMI ENABLE CONTROLS and APM support. Power Management/APM [Enabled] Power Button Mode [On/Off]...

  • Page 75: Exit Menu

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 75 of 78 8.9 Exit Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Power Exit Exit system setup Exit Options after saving the changes. Save Changes and Exit Discard Changes and Exit F10 Key can be used Discard Changes for this operation.

  • Page 76: Ami Bios Beep Codes

    886LCD-M Family KTD-00474-E Public User Manual Date: 2005-05-24 Page 76 of 78 8.10 AMI BIOS Beep Codes Boot Block Beep Codes: Number of Description Beeps Insert diskette in floppy drive A: ‘AMIBOOT.ROM’ file not found in root directory of diskette in A: Base Memory error Flash Programming successful Floppy read error...

  • Page 77: Os Setup

    Use the Setup.exe files for all relevant drivers. The drivers can be found on the 886LCD-M Driver CD or they can be downloaded from the homepage http://www.kontron.dk/extsupport/webswdb/ Note: When installing/using ADD cards like ADD-DVI or ADD-LVDS it's possible that the OS start up without any connected display(s) active.

  • Page 78: Warranty

    78 of 78 10. Warranty KONTRON Technology warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, KONTRON Technology will, at its sole option, repair or replace the product with a similar product.

This manual is also suitable for:

886lcd-m/flex886lcd-m/mitx86lcd-m/atx

Table of Contents