Excluding Mus From Association - Motorola AP-7131N-FGR Installation Manual

5. Configure the
256-bit Key
Default (hexadecimal) 256-bit keys for WP2A/CCMP include:
1011121314151617
18191A1B1C1D1E1F
2021222324252627
28292A2B2C2D2E2F
6. Configure the
roaming and key caching options. This feature is applicable only when using 802.1x EAP
authentication with WPA2/CCMP.
Pre-Authentication
NOTE
7. Click the Apply
screen.
At this point, you can either restrict specific MU access to the access point (using the ACL)
or test the access point for MU interoperability.

3.4.2 Excluding MUs from Association

Optionally, use the access point Access Control List ACL to specify which MUs can or cannot gain
access to an access point managed WLAN. By default, all mobile units can gain access. For specific
Key Settings to set an 256-bit key.
Use a hexadecimal value, and enter 16 hexadecimal characters into
each of the four fields displayed.
Fast Roaming (802.1x only)
Selecting this option enables an associated MU to carry out an
802.1x authentication with another AP-7131 before it roams to it.
The AP-7131 caches the keying information of the client until it
roams to the other AP-7131. This enables the roaming client to
start sending and receiving data sooner by not having to do 802.1x
authentication after it roams. This feature is only supported when
802.1x EAP authentication is enabled.
PMK key caching is enabled internally by default when 802.1x EAP
authentication is enabled.
button to save the security policy and return to the
field as required to enable additional AP-7131
Basic Configuration
AP-71XX Quick Setup
39