Excluding Mus From Association - Motorola AP-7131N-FGR Installation Manual

Remote Subnet Mask Enter the subnet mask for the tunnel's remote network for the
Remote Gateway
4. Select the Auto (IKE) Key Exchange
IKE provides an automatic means of negotiation and authentication for communication
between two or more entities.
5. Configure all the parameters within the
Passphrase must be shared by the external NTP, syslog or Radius resource.
6. From back within the VPN screen, select the
Auto Key Settings
Use the Auto Key Settings
with the tunnel.
7. Configure all the parameters within the
For additional information on configuring either IKE Settings or Auto Key Settings, refer to
the AP-7131N-FGR Access Point Product Reference Guide available at
https://support.symbol.com/support/product/FIPS_and_CC_Compliant_Products.html.
8. Click Apply
External NTP, syslog and Radius resources are now reachable from the access point's secure
VPN tunnel. However, you must supply the access point with the IP address of the NTP,
syslog or Radius server for the access point to connect to those external resources. For
information on configuring external NTP, syslog and Radius server support, refer to the
AP-7131N-FGR Access Point Product Reference Guide available at
https://support.symbol.com/support/product/FIPS_and_CC_Compliant_Products.html.

3.4.3 Excluding MUs from Association

Optionally, use the access point Access Control List ACL to specify which MUs can or cannot gain
access to an access point managed WLAN. By default, all mobile units can gain access. For specific
information on configuring (restricting) MU access, refer to the AP-7131N-FGR Access Point Product
Reference Guide. The guide is available on the Motorola Web site, at
https://support.symbol.com/support/product/FIPS_and_CC_Compliant_Products.html.
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address on
the remote network the VPN tunnel connects to.
button.
screen to specify the type of encryption and authentication used
to save the configuration of the new tunnel.
checkbox and the IKE Settings
IKE Settings screen.The IKE Authentication
Auto (IKE) Key Exchange
Auto Key Settings
Basic Configuration
button.
checkbox and the
screen.
35