Banner Bottom; Part Exit Time; Confirm Time - ADEMCO Galaxy 16 Engineer's Manual

6 = Parameters (cont'd)

13 Banner Bottom

This parameter is used by the engineer to modify the bottom line of the Unset
Banner display.
On selecting Banner Bottom the current banner text appears on the top line of
the display and a section of the available alphanumeric characters are displayed
on the bottom line. The programming is the same as for Banner Top.
Note: If the bottom line is blank then the banner displays the default text, that is,
time, day and date.

14 Part Exit Time

This parameter determines the time users have to exit the premises or selected
part during timed Part Setting of the system. The default is 120 seconds with a
programmable range of 0 to 900 seconds (15 minutes). Entering a value of 900
seconds sets the Exit Time to infinity.

15 Confirm Time

This parameter determines the window in which two unique zone activations
can cause a sequentially confirmed alarm. If the confirm time expires, the
intruder outputs reset and the confirm time will start again on the next zone
activation.
66