Sia Triggers - ADEMCO Galaxy 16 Engineer's Manual

12 = Communications 1 (cont'd)
• Once the trigger has been reprogrammed press ent to accept the
programming or esc to cancel.
• The A or B key can now be used to view the other channels and their
trigger programming, ent selects the currently displayed trigger for
programming.
• When all triggers have been programmed press ent or esc to return to the
triggers menu.
Figure 6.2 DTMF Trigger Programming gives an example of programming
channel 4 with trigger 05 Bells.
07=TRIGGERS
ENT, 01-15=SELECT
(a)
Trigger banner
4=NOT USED
ENT, 1-8=SELECT
(c)
Channel 4 and its current
trigger programming
05=BELLS
CHANNEL TRIGGER
(e)
Trigger 05 Bells is selected

SIA Triggers

The SIA triggers 1 – 8 are shown in Table 6.1 Communications 1 Programming
Options. The system defaults to only trigger 3 (Intruder) enabled. Transition of
SIA events is activated by entry of an event into the Galaxy 16 plus event log.
For details on the Galaxy 16/16 plus Event Log see
.
Option 9 – Log
Press ent to select the
trigger option
Use the A key to scroll
through the channels to
channel 4
Press ent to select
channel 4 for programming
Use the A or B key to scroll
through the triggers to
trigger 05 Bells or enter 0,5
using the numeric keys on
the keypad
Press ent to accept the
programming (esc cancels)
Channel 4 is now programmed as trigger 05 Bells.
Use the A or B key to view the other channels, ent
selects the displayed channel for programming. To
return to the triggers menu press ent.
Figure 6.2 DTMF Trigger Programming.
88
1=NOT USED
ENT, 1-8=SELECT
(B)
Channel 1 is displayed along
with its current trigger
programming (00 Not Used)
00=NOT USED
CHANNEL TRIGGER
(d)
Channel trigger
programming screen
4=BELLS
ENT, 1-8=SELECT
(f)
Section 5: MENU OPTIONS;