Programming Codes And Code Attributes; Assigning And Changing Codes; Deleting Codes - ADEMCO Galaxy 16 Engineer's Manual

Programming Codes and Code Attributes

Assigning and Changing Codes

When the Codes option is selected,
code assigned to this user, the square in the top right corner of the display is
hollow.
Press the ent key to select this user or the A or B keys to view the other users,
then press ent to select.
To programme a new code, or change an existing one, enter a unique four digit
code. The digits appear on the top row of the display as they are entered. If a
wrong key is pressed the Ö key can be used to delete the last digit entered.
Press the ent key to save the programming and return to the
display. The square in the top right corner of the display is black, indicating
that a code is assigned to the user. To cancel the programming press the esc
key.
Note: If the code entered has already been assigned to another user the message
DUPLICATED CODE
selected user.

Deleting Codes

Select the user code to be deleted and press the ent key. The keypad displays
four stars.
Pressing the Ö key four times deletes the currently programmed user code. The
display changes to – – – – , press the ent key to save the programming and
return to the user code menu option or esc to cancel. The square in the top
right corner of the display is hollow, indicating that the User Code has been
deleted, see Figure 5.8 Unassigned User Code. To cancel the code programming
press the esc key.
This is illustrated in Figure 5.9 Deleting a User Code.
Note: This does not default the user code attributes.
4 = Codes (cont'd)
USR 1 CODE
01= USR 1 CODE
ENT, 01-14=SELECT
Figure 5.7 Unassigned User Code.
01= USR 1 CODE
ENT, 01-14=SELECT
Figure 5.8 Assigned User Code.
is displayed; the code entered is not assigned to the
is displayed. If there is no
0X=USR X CODE
z
53