Menu Access; Direct Access - ADEMCO Galaxy 16 Engineer's Manual

Menu Access

×××
(a)
Enter Engineer Code
[01] SYSTEM
ENGINEER
(d)
System alarm message is
displayed
Menu Access
There are two methods of selecting menu options: Direct Access (using keys 0-
9) and Menu Driven Access (using the ent key followed by the A, B or number
keys).

Direct Access

Pressing a valid option number immediately after entering the code selects that
option for programming without having to enter the menu. If the engineer is in
the menu, entering an option number immediately selects that option. Once the
selected menu option has been programmed, the engineer returns to the
previous level of access (menu or Engineer Mode banner). This is illustrated in
Figure 5.2 Direct Menu Access.
Example: Direct access selection of Option 6, Parameters from the Engineer
Banner.
ENGINEER MODE
01:13 FRI 14 JAN
From Engineer Banner
>- A=SET B=PART
ENT, 01-13=MENU
(c)
Engineer Set, Part Set
or Menu Screen
ALARM IS ACTIVE
Keypad goes into alarm
ENGINEER MODE
18:10 MON 30 JUN
Press esc to go to
Engineer Banner
Figure 5.1 Entering Engineer Mode.
(a)
Figure 5.2 Direct Menu Access.
×××
(b)
Enter Engineer Code
>-- A=SET B=PART
ENT, 01-13=MENU
(e)
Press ent to go to Engineer
Set, Part Set or Menu Screen
×××
(b)
Enter Engineer Code
01=ENTRY TIME
ENT, 01-14=SELECT
(d)
Press 6 for Direct Access of
Menu Option 6, Parameters
46
(c)
(f)