Option 4 - Codes; User Function; Engineer Code Access - ADEMCO Galaxy 16 Engineer's Manual

8–16 zone security control panel
Table of Contents

Advertisement

4 = Codes
Option 4 – Codes
On the Galaxy 16 and 16 plus there are 14 User Codes, including the Manager
Code. There is also one Engineer Code. The codes assigned to all users must
have four digits.
There are two default codes on the Galaxy 16 and 16 plus panels as shown in
Table 5.2 Default Codes.

User Function

The user function of the Codes option is to assign, modify and delete the
codes and modify the code attributes of the system users. Only users with the
Modify Codes attribute enabled can carry out these functions, the Manager
Code always has the Modify Codes attribute enabled.
The Manager Code can modify the Manager Code and assign, modify and
delete all other user codes. No other user can modify the Manager Code. The
Manager Code cannot be deleted from the system.
Users with the Modify Codes attribute enabled can assign, modify and delete
user codes (except the Manager Code).

Engineer Code Access

The engineer has restricted access to the Galaxy.
The Engineer Code:
• Cannot unset the system unless it was previously used to set the system.
• Cannot gain access to a set system (full or part). A user code must fully
unset the system first.
• Cannot cancel alarms unless it was previously used to set the system. A
user code must first be entered.
• Causes a tamper alarm on the first entry from the unset mode. A second
entry cancels the alarm.
• Puts the system into Engineer Mode. Zone and module tampers are disabled
while Engineer Mode is accessed.
The engineer function of the Codes option is to assign user attributes to the
User Codes. The code attributes are shown, with their defaults, in Table 5.3
User Code Attributes.
Note: Only the engineer can modify the Resets attribute of the codes.
The engineer can only modify the Engineer Code. No other user can modify the
Engineer Code. The Engineer Code cannot be deleted from the system.
D
e
a f
u
t l
M
a
n
a
g
r e
C
o
d
e
U (
r s
1
E
n
g
n i
e
r e
C
o
d
e
U (
r s
1
Table 5.2 Default Codes.
C
o
d
e
s
) 4
1
2
3
4
) 5
1
1
2
2
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents