Galaxy Gold; Alarm Monitoring; 3Gstu-Pli (Galaxy 16 Plus Only) - ADEMCO Galaxy 16 Engineer's Manual

Galaxy Gold

Galaxy Gold is a software program that allows a PC to communicate and control
the Galaxy 16 and 16 plus control panels. The software program can also
upload, store and download control panel programming. Galaxy Gold operates
with the following configurations:
• Galaxy 16: locally serviced via an RS232 module.
• Galaxy 16 plus: locally serviced via an RS232 module or
remotely serviced via the on-board communicator.
Note: This software program is only available to registered Galaxy Gold users.

Alarm Monitoring

Alarm Monitoring is an advanced, high performance software programme that
allows a PC to receive and store event and alarm information from Galaxy
control panels.
Note: This software programme is only available to registered Alarm Monitoring
users.
3GSTU-PLI
The 3GSTU-PLI is a plug-on module which allows the Galaxy 16 plus to be
connected to the BT RedCARE service. The 3GSTU-PLI connects to the SK1
and SK2 connector blocks on the Galaxy 16 plus PCB which supply the power,
output and alarm input to the module.
For further details on the installation and operation of 3GSTU units see the
accompanying literature. For details on programming the STU options of the
Galaxy 16 plus see
Section 6: COMMUNICATIONS MENU OPTIONS; Option 13
– Communications 2; 4 STU Outputs
Note: The 3GSTU-PLI can also be used on the Galaxy 16 panel with software
version 2.7 or later.
Optional Software Packages
and
5 STU Triggers
25
.