Menu Driven Access - ADEMCO Galaxy 16 Engineer's Manual

Note: Option 1, Omit is selected by entering 01 when using direct access. Options
2 – 9 are selected by entering either a single or double digit number (2 or
02), options 10 – 13 by entering a double digit number (10, 11, 12, 13).

Menu Driven Access

Menu driven access allows the engineer (and users) to enter and remain in the
Galaxy 16/16 plus menu, following entry of their code, until the programming of
the required menu options is completed. This is illustrated in Figure 5.3 Menu
Driven Access.
Example: Menu driven access selection of Option 6, Parameters from the
Engineer Banner.
ENGINEER MODE
01:13 FRI 14 JAN
From Engineer Banner
01=OMIT
ENT, 01-13=MENU
Screen shows first menu option,
Menu Driven Access
(a)
(c)
01 OMIT
Figure 5.3 Menu Driven Access.
×××
(b)
Enter Engineer Code then
press ent
06=PARAMS
ENT, 01-13=MENU
(d)
Use the A or B key to scroll
through the menu options to the
desired one
47