Triggers; Dtmf Triggers - ADEMCO Galaxy 16 Engineer's Manual

07 Triggers

This option is used to either program DTMF triggers or enable SIA triggers.
DTMF or SIA is chosen from menu option 12 Communications 1; 4 Format, the
default is DTMF.
When transmitting to an Alarm Receiving Centre (ARC) in DTMF format the
Galaxy 16 plus is an eight channel communicator. The Triggers option allows
triggers 1 to 8 to be programmed as required.
When transmitting to an ARC in SIA format the Galaxy 16 plus has eight
triggers that can be enabled/disabled as required.

DTMF Triggers

All channels, with the exception of channel three, default to trigger 00-Not
Used, channel three defaults to 03-Intruder. Each of the eight channels can be
programmed to transmit one of the 17 possible DTMF triggers.
Triggers assume the programmed functions of the corresponding outputs and
can be enabled to transmit these functions to a Monitoring Station.
To programme a channel trigger:
• Go to the triggers option and press the ent key, the keypad display shows
the first channel and its current trigger programming.
• If channel 1 is to be reprogrammed press ent; otherwise use the A or B
key to view the other channels pressing ent to select the channel to be
programmed.
• The display shows the channel's current trigger programming; use the A
or B key to scroll through the available triggers or use the number keys to
directly enter the Trigger Type No. For a list of the trigger types and their
numbers see Table 6.2 DTMF Triggers.
12 = Communications 1 (cont'd)
r T g i g r e T y p e N . o r T g i g r e
0 0 N t o U s
0 1 i F e r
0 2 P A
0 3 t n I u r d r e
0 4 S t e
0 5 B e s l l
0 6 t S o r b e
0 7 S w c t i h
0 8 S e c r u y t i
0 9 C o n r i f m
1 0 H o n r
1 1 M e d c i l a
1 2 A C F a
1 3 i L k n A
1 4 i L k n B
1 5 B a t t L o
1 6 a T m p r e
1 7 O m t i
Table 6.2 DTMF Triggers.
87
T y p e
e d
D C
l i
w