Roll Turn Assembly (Pl3.3.20) - Xerox phaser 6250 Service Manual

Roll Turn Assembly (PL3.3.20)

1.
Remove the Printer Chassis from the Paper Feeder Assembly (page 8-20).
2.
Remove the Paper Pick Assembly (page 8-22).
3.
Remove the Clutch Turn Assembly (page 8-34).
4. Release the tab securing the Gear Feed 2 (item 2#) to the shaft of the Paper Pick
Assembly and pull out the Gear Feed 2.
5.
Pull out the Idler Gear (item #1) and Idler Gear In (item #3) from the Paper Pick
Assembly.
6.
Remove the right and left e-rings securing the shaft of the Roll Turn Assembly to
the Paper Pick Assembly.
7.
Remove the metal bearing (item #6) securing the right shaft end of the Turn Roll
Assembly.
8.
Remove the black bearing (item #4) securing the left shaft end of the Roll Turn
Assembly.
9.
Remove the shaft (item #5) from the Paper Pick Assembly.
4
Replacement Notes
Note
Ensure that metal bearing is replaced on the clutch end of the shaft.
Service Parts Disassembly
5
6
manuals4you.com manuals4you.com
3
2
1
6250-161
8-35