Download Print this page
Xerox Phaser 6250 Maintenance
Xerox Phaser 6250 Maintenance

Xerox Phaser 6250 Maintenance

Color laser printer
Hide thumbs Also See for Phaser 6250:

Advertisement

Maintenance
This topic includes:
"Cleaning the Outside of the Printer" on page 4-20
"Cleaning the Density Sensor" on page 4-21
For safety information, go to
Documentation CD-ROM.
Your printer needs little maintenance to keep it producing quality prints. Certain routine
maintenance items need to be ordered occasionally:
Toner Cartridges (Cyan, Yellow, Magenta, and Black)
Imaging Unit
Fuser
Transfer Roller
Feed Roller Kit
Access the "Supplies Usage Page" from the printer's front panel, from CentreWare IS, or print
the "Usage Profile" at the printer's front panel.
Caution
If you attempt to use a non-Xerox toner cartridge, it may not fit properly into the printer. If
the cartridge does not fit properly, the printer will be unable to function.
Order extra printer supplies when the printer's front panel displays a warning that the supply is
low or near the end of its life. You must replace the supply when the front panel displays an
error message that the supply is empty or at the end of its life.
For information about supplies, go to www.xerox.com/officeprinting/6250supplies. Each
supply includes installation instructions with the packaging.

Cleaning the Outside of the Printer

You can clean the outside of the printer with a soft, damp, cloth. You can use a cloth moistened
with a mild neutral detergent to remove stains; do not spray detergent directly onto the printer.
Warning
To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Do not use a vacuum cleaner to clean the printer. Do not lubricate the printer with oil.
Copyright © 2003 Xerox Corporation. All Rights Reserved.
Reference/Troubleshooting/User Safety
4-20
Phaser® 6250 Color Laser Printer
on the User

Advertisement

loading
Need help?

Need help?

Do you have a question about the Phaser 6250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xerox Phaser 6250

  • Page 1: Cleaning The Outside Of The Printer

    “Usage Profile” at the printer’s front panel. Caution If you attempt to use a non-Xerox toner cartridge, it may not fit properly into the printer. If the cartridge does not fit properly, the printer will be unable to function.
  • Page 2: Cleaning The Density Sensor

    The printer has stopped printing because the density sensor is dirty. To clean it: Push up the latch on the front of the printer to open Front Door A. Remove the transfer roller. Squeeze together the orange tabs at both sides of the transfer roller and gently lift it out of the printer.
  • Page 3 Do not use isopropyl alcohol or canned air on the sensor. Reinstall the transfer roller. Insert the rounded ends of the transfer roller into the curved black guides inside the printer. Lock the transfer roller into the printer by pushing down on the orange tabs until you hear a click.