Stf Paper Pick Assembly (Pl15.4.1) - Xerox phaser 6250 Service Manual

STF Paper Pick Assembly (PL15.4.1)

1. Remove the Right and Left Tray Guide Assemblies (page 8-138) and
(page 8-141).
2.
Remove the Link Actuator (page 8-143).
3.
Remove the 2 screws securing the Paper Pick Assembly to the right side of the
STF frame.
4.
Release 2 tabs on the Paper Pick Assembly from the 2 slits and window on the
left side of the STF frame.
5.
Disconnect P/J824, P/J8220 and P/J825.
6.
Remove the Paper Pick Assembly through the window.
Note
When removing or replacing the the screws, be careful not to damage the
Gear or Spring with the screwdriver. When passing the Paper Pick Assembly
through the window, be careful not to damage the rubber parts.
8-144 Phaser 6250 Color Laser Printer Service Manual
6250-421