Rear Fan (Pl 12.1.2) - Xerox phaser 6250 Service Manual

Rear Fan (PL 12.1.2)

1. Remove the Cover Rear (page 8-12).
2.
Disconnect P/J166 from the Low-Voltage Power Supply board.
3.
Carefully shift the harness out of the 4 hooks on the Toner Cartridge Holder
Assembly.
4.
Remove the 2 screws securing the Rear Fan to the printer and remove the fan.
Replacement Notes
Note
When replacing the fan note the airflow direction, the label side should face
out.
RIGHT
8-102 Phaser 6250 Color Laser Printer Service Manual
LEFT
6250-228