Remove Ribbon From [Y] [M] [C] [K] Toner Cartridge - Xerox phaser 6250 Service Manual

Remove Ribbon from [Y] [M] [C] [K] Toner Cartridge

■
Remove the Toner Cartridge and ensure that the ribbon tape has been
completely removed.
■
Inspect the mouth of the toner auger for obstructions or debris.
■
Cycle printer power.
■
If the problem persists, follow the procedure below
Troubleshooting Reference Table
Applicable Parts
Pertinent Toner Cartridge,
PL 10.1.7, 8, 9, or 10
Troubleshooting Procedure Table
Steps Actions and Questions
1 Has the shipping ribbon been removed
from the Toner Cartridge?
2 Does the error clear after Door A is
opened and closed?
Error Messages and Codes
Wiring and Plug/Jack Map References
manuals4you.com manuals4you.com
Yes
Go to Step 2.
Complete
No
Remove the
ribbon and power
cycle the printer.
Refer to "[Y] [M]
[C] [K] Toner
Cartridge Is Low"
troubleshooting
procedure
page 3-45.
3-49