Xerox phaser 6250 Service Manual page 289

Hide thumbs Also See for phaser 6250:

Table of Contents

The biasing buttons fall out easily when touched from inside the printer, see

the following drawing for location. Avoid touching the biasing buttons while

the Housing Assembly Bias is removed from the printer.

Replacement Notes

To avoid equipment damage, move all wiring harnesses out of the way when

replacing. Ensure that all 8 biasing buttons (PL 9.1.5) are in place. Verify the

proper alignment of the biasing springs.

Phaser 6250 Color Laser Printer Service Manual

Troubleshooting