The Dhcpv6 Lease Screen - ZyXEL Communications USG40 User Manual

The following table describes the labels in this screen.
Table 341 Configuration > DHCPv6 > Request > Add
LABEL
Name
Request Type
Interface
OK
Cancel

42.14.2 The DHCPv6 Lease Screen

The Lease screen allows you to add, edit, and remove DHCPv6 lease type objects. To access this
screen, login to the Web Configurator, and click Configuration > Object > DHCPv6 > Lease.
Figure 568 Configuration > Object > DHCPv6 > Lease
The following table describes the labels in this screen.
Table 342 Configuration > Object > DHCPv6 > Lease
LABEL
Configuration
Add
Edit
Remove
Object
References
#
Name
Type
Interface
Value
42.14.2.1 DHCPv6 Lease Add/Edit Screen
The Lease Add/Edit screen allows you to create a new lease object or edit an existing one.
To access this screen, go to the Lease screen (see
the Add icon or an Edit icon.
Chapter 42 Object
DESCRIPTION
Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
Select the request type for this request object. You can choose from Prefix
Delegation, DNS Server, NTP Server, or SIP Server.
Select the interface for this request object.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each lease object.
This field displays the request type of each lease object.
This field displays the interface used for each lease object.
This field displays the value for each lease object.
ZyWALL/USG Series User's Guide
Section 42.14.2 on page
820
820), and click either