Ethernet Neighbor Screen - ZyXEL Communications USG40 User Manual

Table 56 Monitor > System Status > USB Storage (continued)
LABEL
Status
Detail

7.14 Ethernet Neighbor Screen

The Ethernet Neighbor screen allows you to view the ZyWALL/USG's neighboring devices in one
place.
It uses Smart Connect, that is Link Layer Discovery Protocol (LLDP) for discovering and configuring
LLDP-aware devices in the same broadcast domain as the ZyWALL/USG that you're logged into
using the web configurator.
LLDP is a layer-2 protocol that allows a network device to advertise its identity and capabilities on
the local network. It also allows the device to maintain and store information from adjacent devices
which are directly connected to the network device. This helps you discover network changes and
perform necessary network reconfiguration and management.
Note: Enable Smart Connect in the System > ZON screen.
See also System > ZON for more information on the Zyxel One Network (ZON) utility that uses the
Zyxel Discovery Protocol (ZDP) for discovering and configuring ZDP-aware Zyxel devices in the
same network as the computer on which the ZON utility is installed.
Click Monitor > System Status > Ethernet Neighbor to see the following screen
Figure 167 Monitor > System Status > Ethernet Neighbor
Chapter 7 Monitor
DESCRIPTION
Ready - you can have the ZyWALL/USG use the USB storage device.
Click Remove Now to stop the ZyWALL/USG from using the USB storage device so
you can remove it.
Unused - the connected USB storage device was manually unmounted by using
the Remove Now button or for some reason the ZyWALL/USG cannot mount it.
Click Use It to have the ZyWALL/USG mount a connected USB storage device. This
button is grayed out if the file system is not supported (unknown) by the ZyWALL/
USG.
none - no USB storage device is connected.
This field displays any other information the ZyWALL/USG retrieves from the USB
storage device.
• Deactivated - the use of a USB storage device is disabled (turned off) on the
ZyWALL/USG.
• OutofSpace - the available disk space is less than the disk space full threshold.
• Mounting - the ZyWALL/USG is mounting the USB storage device.
• Removing - the ZyWALL/USG is unmounting the USB storage device.
• none - the USB device is operating normally or not connected.
ZyWALL/USG Series User's Guide
201