Add / Edit Ssl Inspection Profiles - ZyXEL Communications USG40 User Manual

Table 270 Configuration > UTM Profile > SSL Inspection > Profile (continued)
LABEL
Edit
Remove
Object Reference
#
Name
Description
CA Certificate
Reference

40.2.1 Add / Edit SSL Inspection Profiles

Click Configuration > UTM Profile > SSL Inspection > Profile > Add to create a new profile or
select an existing profile and click Edit to change its settings.
Figure 478 Configuration > UTM Profile > SSL Inspection > Profile > Add / Edit
The following table describes the fields in this screen.
Table 271 Configuration > UTM Profile > SSL Inspection > Profile > Add / Edit
LABEL
Name
Description
Chapter 40 SSL Inspection
DESCRIPTION
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
Select an entry and click Object References to open a screen that shows which
settings use the entry. Click Refresh to update information on this screen.
This is the entry's index number in the list.
This displays the name of the profile.
This displays the description of the profile.
This displays the CA certificate being used in this profile.
This displays the number of times an object reference is used in a profile.
DESCRIPTION
This is the name of the profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. These are valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Enter additional information about this SSL Inspection entry. You can enter up to 60
characters ("0-9", "a-z", "A-Z", "-" and "_").
ZyWALL/USG Series User's Guide
700