The Mail Scan Screen - ZyXEL Communications USG40 User Manual

Table 264 Configuration > UTM Profile > Anti-Spam > Profile > Add (continued)
LABEL
Check Mail
Content
Check Virus
Outbreak
Check DNSBL
Actions for Spam
Mail
SMTP
POP3
OK
Cancel

39.4 The Mail Scan Screen

Click Configuration > UTM Profile > Anti-Spam > Mail Scan to open the Mail Scan screen.
Use this screen to enable and configure the Mail Scan functions. You must first enable the Mail Scan
functions on this screen before selecting them in the Configuration > UTM Profile > Anti-Spam
> Profile > Add/Edit screen.
Chapter 39 Anti-Spam
DESCRIPTION
Select this to identify Spam Email by content, such as malicious content.
Select this to scan emails for attached viruses.
Select this check box to check e-mail against the ZyWALL/USG's configured DNSBL
domains. The ZyWALL/USG classifies e-mail that matches a DNS black list as spam.
Use this section to set how the ZyWALL/USG is to handle spam mail.
Select how the ZyWALL/USG is to handle spam SMTP mail.
Select drop to discard spam SMTP mail.
Select forward to allow spam SMTP mail to go through.
Select forward with tag to add a spam tag to an SMTP spam mail's mail subject and
send it on to the destination.
Select how the ZyWALL/USG is to handle spam POP3 mail.
Select forward to allow spam POP3 mail to go through.
Select forward with tag to add a spam tag to an POP3 spam mail's mail subject and
send it on to the destination.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
685