ZyXEL Communications USG40 User Manual page 780

Table 318 Configuration > Object > Schedule (continued)
LABEL
Object
References
#
Name
Start Day /
Time
Stop Day /
Time
Reference
Recurring
Add
Edit
Remove
Object
References
#
Name
Start Time
Stop Time
Reference
42.8.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
and click either the Add icon or an Edit icon in the One Time section.
Figure 536 Configuration > Object > Schedule > Edit (One Time)
Chapter 42 Object
DESCRIPTION
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific schedule.
This field displays the name of the schedule, which is used to refer to the schedule.
This field displays the date and time at which the schedule begins.
This field displays the date and time at which the schedule ends.
This displays the number of times an object reference is used in a profile.
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific schedule.
This field displays the name of the schedule, which is used to refer to the schedule.
This field displays the time at which the schedule begins.
This field displays the time at which the schedule ends.
This displays the number of times an object reference is used in a profile.
ZyWALL/USG Series User's Guide
780
Section 42.8.2 on page 779),