ZyXEL Communications USG40 User Manual page 732

Table 283 Configuration > Object > User/Group > Group (continued)
LABEL
Object
References
#
Group Name
Description
Member
Reference
42.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see
Add icon or an Edit icon.
Figure 498 Configuration > Object > User/Group > Group > Add
The following table describes the labels in this screen.
Table 284 Configuration > Object > User/Group > Group > Add
LABEL
Name
Description
Member List
OK
Cancel
Chapter 42 Object
DESCRIPTION
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a comma.
This displays the number of times an object reference is used in a profile.
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the users and user groups that have been added
to the user group. The order of members is not important. Select users and groups from
the Available list that you want to be members of this group and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
Section 42.2.3 on page
732
731), and click either the