The Anti-Spam Profile Add Or Edit Screen - ZyXEL Communications USG40 User Manual

Table 263 Configuration > UTM Profile > Anti-Spam > Profile
LABEL
Remove
Object
Reference
Priority
Name
Description
Scan Options
Reference
License
License Status
License Type
Expiration
Date
Apply
Reset

39.3.1 The Anti-Spam Profile Add or Edit Screen

Click the Add or Edit icon in the Configuration > UTM Profile > Anti-Spam > Profile screen to
display the configuration screen as shown next. Use this screen to configure an anti-spam policy
that controls what traffic direction of e-mail to check, which e-mail protocols to scan, the scanning
options, and the action to take on spam traffic.
Chapter 39 Anti-Spam
DESCRIPTION
Select an entry and click this to delete it.
Select an entry and click Object References to open a screen that shows which settings
use the entry. Click Refresh to update information in this screen.
This is the index number of the anti-spam rule. Antis-spam rules are applied in turn.
The name identifies the anti-spam rule.
This is some optional extra information on the rule.
This shows which types (protocols) of traffic to scan for spam.
This shows how many objects are referenced in the rule.
This read-only field displays the status of your anti-spam scanning service registration.
Not Licensed displays if you have not successfully registered and activated the service.
Expired displays if your subscription to the service has expired.
Licensed displays if you have successfully registered the ZyWALL/USG and activated the
service.
This read-only field displays what kind of service registration you have for the anti-spam
scanning.
None displays if you have not successfully registered and activated the service.
Standard displays if you have successfully registered the ZyWALL/USG and activated
the service with your iCard's PIN number.
Trial displays if you have successfully registered the ZyWALL/USG and activated the trial
service subscription.
This field displays the date your service license expires.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
683