Schedule Overview - ZyXEL Communications USG40 User Manual

Figure 534 Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 317 Configuration > Object > Service > Service Group > Edit
LABEL
Name
Description
Member List
OK
Cancel

42.8 Schedule Overview

Use schedules to set up one-time and recurring schedules for policy routes, security policies,
application patrol, and content filtering. The ZyWALL/USG supports one-time and recurring
schedules. One-time schedules are effective only once, while recurring schedules usually repeat.
Both types of schedules are based on the current date and time in the ZyWALL/USG.
Note: Schedules are based on the ZyWALL/USG's current date and time.
• Use the Schedule summary screen
the ZyWALL/USG.
Chapter 42 Object
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
The Member list displays the names of the service and service group objects that have
been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
(Section 42.8.2 on page
ZyWALL/USG Series User's Guide
779) to see a list of all schedules in
778