The Traffic Statistics Screen - ZyXEL Communications USG40 User Manual

Table 43 Monitor > System Status > Interface Status (continued)
LABEL
Tunnel Interface
Status
Name
Status
Zone
IP Address
My Address
Remote Gateway
Address
Mode
Interface
Statistics
Refresh
Expand/Close
Name
Status
TxPkts
RxPkts
Tx B/s
Rx B/s

7.4 The Traffic Statistics Screen

Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This
screen provides basic information about the following for example:
• Most-visited Web sites and the number of times each one was visited. This count may not be
accurate in some cases because the ZyWALL/USG counts HTTP GET packets. Please see
on page 188
• Most-used protocols or service ports and the amount of traffic on each one
• LAN IP with heaviest traffic and how much traffic has been sent to and from each one
Chapter 7 Monitor
DESCRIPTION
This displays the details of the ZyWALL/USG's configured tunnel interfaces.
This field displays the name of the interface.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the zone to which the interface is assigned.
This is the IP address of the interface. If the interface is active (and connected), the
ZyWALL/USG tunnels local traffic sent to this IP address to the Remote Gateway
Address.
This is the interface or IP address uses to identify itself to the remote gateway. The
ZyWALL/USG uses this as the source for the packets it tunnels to the remote gateway.
This is the IP address or domain name of the remote gateway to which this interface
tunnels traffic.
This field displays the tunnel mode that you are using.
This table provides packet statistics for each interface.
Click this button to update the information in the screen.
Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.
This field displays the name of each interface. If there is a Expand icon (plus-sign) next to
the name, click this to look at the statistics for virtual interfaces on top of this interface.
This field displays the current status of the interface.
• Down - The interface is not connected.
• Speed / Duplex - The interface is connected. This field displays the port speed and
duplex setting (Full or Half).
This field displays Connected and the accumulated connection time (hh:mm:ss) when the
PPP interface is connected.
This field displays the number of packets transmitted from the ZyWALL/USG on the
interface since it was last connected.
This field displays the number of packets received by the ZyWALL/USG on the interface
since it was last connected.
This field displays the transmission speed, in bytes per second, on the interface in the one-
second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the interface in the one-
second interval before the screen updated.
for more information.
ZyWALL/USG Series User's Guide
187
Table 44