Ftp; Configuring Ftp - ZyXEL Communications USG40 User Manual

Zywall/usg series

Hide thumbs Also See for USG40:

Table of Contents

43.10 FTP

You can upload and download the ZyWALL/USG's firmware and configuration files using FTP. To use

this feature, your computer must have an FTP client.

To change your ZyWALL/USG's FTP settings, click Configuration > System > FTP tab. The screen

appears as shown. Use this screen to specify from which zones FTP can be used to access the

ZyWALL/USG. You can also specify from which IP addresses the access can come.

Figure 611 Configuration > System > FTP

The following table describes the labels in this screen.

Table 361 Configuration > System > FTP

TLS required

Service Control

Chapter 43 System

Select the check box to allow or disallow the computer with the IP address that matches

the IP address(es) in the Service Control table to access the ZyWALL/USG using this

Select the check box to use FTP over TLS (Transport Layer Security) to encrypt

communication.

This implements TLS as a security mechanism to secure FTP clients and/or servers.

You may change the server port number for a service if needed, however you must use the

same port number in order to use that service for remote management.

Select the certificate whose corresponding private key is to be used to identify the

ZyWALL/USG for FTP connections. You must have certificates already configured in the My

Certificates screen.

This specifies from which computers you can access which ZyWALL/USG zones.

Click this to create a new entry. Select an entry and click Add to create a new entry after

the selected entry. Refer to

Double-click an entry or select it and click Edit to be able to modify the entry's settings.

ZyWALL/USG Series User's Guide

Table 357 on page 844

for details on the screen that opens.

Show Quick Links

Table of Contents