ZyXEL Communications USG40 User Manual page 516

Figure 362 Configuration > Security Policy > Policy Control
The following table describes the labels in this screen.
Table 196 Configuration > Security Policy > Policy Control
LABEL DESCRIPTION
Show Filter/Hide Click Show Filter to display IPv4 and IPv6 (if enabled) security policy search filters.
Filter
IPv4 / IPv6 Use IPv4 / IPv6 search filters to find specific IPv4 and IPv6 (if enabled) security policies
Configuration based on direction, application, user, source, destination and/or schedule.
From / To Select a zone to view all security policies from a particular zone and/or to a particular zone.
any means all zones.
IPv4 / IPv6 Type an IPv4 or IPv6 IP address to view all security policies based on the IPv4 / IPv6
Source
source address object used.
• An IPv4 IP address is written as four integer blocks separated by periods. This is an
example IPv4 address: 172.16.6.7.
• An 128-bit IPv6 address is written as eight 16-bit hexadecimal blocks separated by
colons (:). This is an example IPv6 address:
2001:0db8:1a2b:0015:0000:0000:1a2f:0000.
Chapter 28 Security Policy
ZyWALL/USG Series User's Guide
516