Lag Add/Edit - ZyXEL Communications USG40 User Manual

Table 119 Configuration > Network > Interface > LAG (continued)
LABEL
Apply
Reset

10.9.2 LAG Add/Edit

This screen lets you configure Interface and LAG parameters for each LAG interface. To access this
screen, click the Add or Edit icon in the LAG screen. The following screen appears.
Figure 240 Configuration > Network > Interface > LAG > Add
Chapter 10 Interfaces
DESCRIPTION
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
338