The Ssl Inspection Screens - ZyXEL Communications USG40 User Manual

Table 75 Monitor > UTM Statistics > Anti-Spam > Status (continued)
LABEL
DNSBL Domain
Total Queries
Avg. Response Time (sec)
No Response

7.25 The SSL Inspection Screens

The ZyWALL/USG uses SSL Inspection to decrypt SSL traffic, sends it to the UTM engines for
inspection, then encrypts traffic that passes inspection and forwards it.
Click Monitor > UTM Statistics > SSL Inspection > Report to display the following screen.
Figure 189 Monitor > UTM Statistics > SSL Inspection > Report
The following table describes the labels in this screen.
Table 76 Monitor > UTM Statistics > SSL Inspection > Report
LABEL
Collect Statistics
Apply
Reset
Refresh
Chapter 7 Monitor
DESCRIPTION
These are the DNSBLs the ZyWALL/USG uses to check sender and relay IP
addresses in e-mails.
This is the total number of DNS queries the ZyWALL/USG has sent to this DNSBL.
This is the average for how long it takes to receive a reply from this DNSBL.
This is how many DNS queries the ZyWALL/USG sent to this DNSBL without
receiving a reply.
DESCRIPTION
Select this check box to have the ZyWALL/USG collect SSL Inspection statistics.
The collection starting time displays after you click Apply. All of the statistics in
this screen are for the time period starting at the time displayed here. The format
is year, month, day and hour, minute, second. All of the statistics are erased if you
restart the ZyWALL/USG or click Flush Data. Collecting starts over and a new
collection start time displays.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
Click this button to update the report display.
ZyWALL/USG Series User's Guide
226