ZyXEL Communications USG40 User Manual page 183

Figure 153 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 41 Monitor > System Status > Port Statistics
LABEL DESCRIPTION
Poll Interval Enter how often you want this window to be updated automatically, and click Set
Interval.
Set Interval Click this to set the Poll Interval the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
Switch to Click this to display the port statistics as a line graph.
Graphic View
# This field is a sequential value, and it is not associated with a specific port.
Port This field displays the physical port number.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and
duplex setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the ZyWALL/USG on the
physical port since it was last connected.
RxPkts This field displays the number of packets received by the ZyWALL/USG on the physical port
since it was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Rx B/s This field displays the reception speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Up Time This field displays how long the physical port has been connected.
System Up Time This field displays how long the ZyWALL/USG has been running since it last restarted or
was turned on.
Chapter 7 Monitor
ZyWALL/USG Series User's Guide
183