Ppp Interface Summary - ZyXEL Communications USG40 User Manual

Zywall/usg series
Hide thumbs Also See for USG40:
Table of Contents

Advertisement

PPPoE/PPTP/L2TP interfaces are similar to other interfaces in some ways. They have an IP address,
subnet mask, and gateway used to make routing decisions; they restrict bandwidth and packet
size; and they can verify the gateway is available. There are two main differences between PPPoE/
PPTP/L2TP interfaces and other interfaces.
• You must also configure an ISP account object for the PPPoE/PPTP/L2TP interface to use.
Each ISP account specifies the protocol (PPPoE or PPTP or L2TP), as well as your ISP account
information. If you change ISPs later, you only have to create a new ISP account, not a new
PPPoE/PPTP/L2TP interface. You should not have to change any network policies.
• You do not set up the subnet mask or gateway.
PPPoE/PPTP/L2TP interfaces are interfaces between the ZyWALL/USG and only one computer.
Therefore, the subnet mask is always 255.255.255.255. In addition, the ZyWALL/USG always
treats the ISP as a gateway.

10.4.1 PPP Interface Summary

This screen lists every PPPoE/PPTP/L2TP interface. To access this screen, click Configuration >
Network > Interface > PPP.
Figure 223 Configuration > Network > Interface > PPP
Each field is described in the table below.
Table 105 Configuration > Network > Interface > PPP
LABEL
User Configuration /
System Default
Add
Edit
Remove
Activate
Inactivate
Chapter 10 Interfaces
DESCRIPTION
The ZyWALL/USG comes with the (non-removable) System Default PPP interfaces
pre-configured. You can create (and delete) User Configuration PPP interfaces.
System Default PPP interfaces vary by model.
Click this to create a new user-configured PPP interface.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove a user-configured PPP interface, select it and click Remove. The ZyWALL/
USG confirms you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
ZyWALL/USG Series User's Guide
290

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents