ZyXEL Communications USG40 User Manual page 231

Figure 192 Monitor > Log > View AP Log
The following table describes the labels in this screen.
LABEL
Show Filter
Select an AP
Query
Log Query Status
AP Information
Log File Status
Last Log Query
Time
Display
Source Address
Source Interface
Service
Protocol
Priority
Chapter 7 Monitor
DESCRIPTION
Click this button to show or hide the filter settings.
If the filter settings are hidden, the Display, Email Log Now, Refresh, and Clear
Log fields are available.
If the filter settings are shown, the Display, Priority, Source Address,
Destination Address, Service, Keyword, and Search fields are available.
Click the pull down menu to choose an AP.
Click Query to create a Query log.
The field displays the
This field displays the AP information. N/A is displayed when
This field displays how many logs are available. It will display Empty if there's none.
This field displays the most recent time a log query was solicited.
Select the category of log message(s) you want to view. You can also view All Logs
at one time, or you can view the Debug Log.
Type the IP address of the source AP.
Select the interface of the source AP from the pull down menu. Choose Any to
search all interface.
Select a policy service available from
Select the protocol of the AP from the pull down menu.
This displays when you show the filter. Select the priority of log messages to
display. The log displays the log messages with this priority or higher. Choices are:
any, emerg, alert, crit, error, warn, notice, and info, from highest priority to
lowest priority. This field is read-only if the Category is Debug Log.
ZyWALL/USG Series User's Guide
231
ZyWALL/USG
from the pull down menu.