ZyXEL Communications USG40 User Manual page 753

Table 296 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
The following fields are available if you set Security Mode to wpa, wpa2 or wpa2-mix.
PSK
Pre-Shared Key
Cipher Type
Idle Timeout
Group Key Update
Timer
Pre-Authentication
OK
Cancel
42.3.2.5 MAC Filter List
This screen allows you to create and manage security configurations that can be used by your
SSIDs. To access this screen click Configuration > Object > AP Profile > SSID > MAC Filter
List.
Note: You can have a maximum of 32 MAC filtering profiles on the ZyWALL/USG.
Figure 512 Configuration > Object > AP Profile > SSID > MAC Filter List
The following table describes the labels in this screen.
Table 297 Configuration > Object > AP Profile > SSID > MAC Filter List
LABEL
Add
Edit
Chapter 42 Object
DESCRIPTION
Select this option to use a Pre-Shared Key with WPA encryption.
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
Select an encryption cipher type from the list.
• auto - This automatically chooses the best available cipher based on the cipher in
use by the wireless client that is attempting to make a connection.
• tkip - This is the Temporal Key Integrity Protocol encryption method added later to
the WEP encryption protocol to further secure. Not all wireless clients may support
this.
• aes - This is the Advanced Encryption Standard encryption method. It is a more
recent development over TKIP and considerably more robust. Not all wireless clients
may support this.
Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Enter the interval (in seconds) at which the AP updates the group WPA encryption key.
This field is available only when you set Security Mode to wpa2 or wpa2-mix and
enable 802.1x authentication.
Enable or Disable pre-authentication to allow the AP to send authentication
information to other APs on the network, allowing connected wireless clients to switch
APs without having to re-authenticate their network connection.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new MAC filtering profile.
Click this to edit the selected MAC filtering profile.
ZyWALL/USG Series User's Guide
753