The Redirect Service Screen - ZyXEL Communications USG40 User Manual

For SMTP traffic between lan1 and lan2:
• a from LAN1 to LAN2 firewall rule to allow SMTP messages from lan1 to lan2. Responses to this
request are allowed automatically.
• a SMTP redirect rule to forward SMTP traffic from lan1 to SMTP server A.
For SMTP traffic between lan2 and wan1:
• a from LAN2 to WAN firewall rule (default) to allow SMTP messages from lan2 to wan1.
Responses to these requests are allowed automatically.
• a policy route to forward SMTP messages from SMTP server A to the Internet.

14.2 The Redirect Service Screen

To configure redirection of a HTTP or SMTP request, click Configuration > Network > HTTP
Redirect. This screen displays the summary of the redirect rules.
Note: You can configure up to one HTTP redirect rule and one SMTP redirect rule for each
(incoming) interface.
Figure 276 Configuration > Network > Redirect Service
The following table describes the labels in this screen.
Table 146 Configuration > Network > Redirect Service
LABEL
Add
Edit
Remove
Activate
Inactivate
#
Status
Service
Name
User/Group
Chapter 14 Redirect Service
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want
to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This is the name of the service: HTTP or SMTP.
This is the descriptive name of a rule.
This is the user account or user group name to which this rule is applied.
ZyWALL/USG Series User's Guide
398