The Dns Inbound Lb Screen - ZyXEL Communications USG40 User Manual

• Use the Inbound LB Add/Edit screen (see
load balancing rule.

19.2 The DNS Inbound LB Screen

The Inbound LB screen provides a summary of all DNS load balancing rules and the details. You
can also use this screen to add, edit, or remove the rules. Click Configuration > Network >
Inbound LB to open the following screen.
Note: After you finish the inbound load balancing settings, go to security policy and NAT
screens to configure the corresponding rule and virtual server to allow the Internet
users to access your internal servers.
Figure 303 Configuration > Network > DNS Inbound LB
The following table describes the labels in this screen.
Table 157 Configuration > Network > DNS Inbound LB
LABEL
Global Setting
Enable DNS Load
Balancing
Configuration
Add
Edit
Remove
Activate
Inactivate
Move
Status
Priority
Query Domain Name
Chapter 19 DNS Inbound LB
DESCRIPTION
Select this to enable DNS load balancing.
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you
want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon. In the field
that appears, specify the number to which you want to move the entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the order in which the ZyWALL/USG checks the member
interfaces of this DNS load balancing rule.
This field displays the domain name for which the ZyWALL/USG manages load
balancing between the specified interfaces.
ZyWALL/USG Series User's Guide
428
Section 19.2.1 on page 429) to add or edit a DNS