User/Group User Summary Screen - ZyXEL Communications USG40 User Manual

Note: You cannot put the default admin account into any user group.
The sequence of members in a user group is not important.
User Awareness
By default, users do not have to log into the ZyWALL/USG to use the network services it provides.
The ZyWALL/USG automatically routes packets for everyone. If you want to restrict network
services that certain users can use via the ZyWALL/USG, you can require them to log in to the
ZyWALL/USG first. The ZyWALL/USG is then 'aware' of the user who is logged in and you can create
'user-aware policies' that define what services they can use. See
user-aware login example.
Finding Out More
• See Section 42.2.6 on page 739
authentication server in order to log in.
• The ZyWALL/USG supports TTLS using PAP so you can use the ZyWALL/USG's local user database
to authenticate users with WPA or WPA2 instead of needing an external RADIUS server.

42.2.2 User/Group User Summary Screen

The User screen provides a summary of all user accounts. To access this screen, login to the Web
Configurator, and click Configuration > Object > User/Group.
Figure 495 Configuration > Object > User/Group > User
The following table describes the labels in this screen.
Table 281 Configuration > Object > User/Group > User
LABEL
Add
Edit
Remove
Object
References
#
User Name
Chapter 42 Object
for some information on users who use an external
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific user.
This field displays the user name of each user.
ZyWALL/USG Series User's Guide
728
Section 42.2.6 on page 739 for a