ZyXEL Communications USG40 User Manual page 229

heading cell again to reverse the sort order. The Web Configurator saves the filter settings if you
leave the View Log screen and return to it later.
Figure 191 Monitor > Log > View Log
The following table describes the labels in this screen.
Table 78 Monitor > Log > View Log
LABEL
Show (Hide) Filter
Category
Priority
Category
Chapter 7 Monitor
DESCRIPTION
Click this button to show or hide the filter settings.
If the filter settings are hidden, the Category, Email Log Now, Refresh, and
Clear Log fields are available.
If the filter settings are shown, the Category, Priority, Source Address,
Destination Address, Source Interface, Destination Interface, Service,
Keyword, and Search fields are available.
Select the type of log message(s) you want to view. You can also view All Logs at
one time, or you can view the Debug Log.
This displays when you show the filter. Select the priority of log messages to
display. The log displays the log messages with this priority or higher. Choices are:
any, emerg, alert, crit, error, warn, notice, and info, from highest priority to
lowest priority. This field is read-only if the Category is Debug Log.
This field displays the log that generated the log message. It is the same value used
in the Category field above.
ZyWALL/USG Series User's Guide
229