ZyXEL Communications USG40 User Manual page 884

Figure 627 Configuration > Log & Report > Log Setting > Edit (System Log - AP)
The following table describes the labels in this screen.
Table 375 Configuration > Log & Report > Log Setting > Edit (System Log)
LABEL DESCRIPTION
E-Mail Server 1/2
Active Select this to send log messages and alerts according to the information in this
section. You specify what kinds of log messages are included in log information and
what kinds of log messages are included in alerts in the Active Log and Alert
section.
Mail Server Type the name or IP address of the outgoing SMTP server.
Mail Subject Type the subject line for the outgoing e-mail.
Send From Type the e-mail address from which the outgoing e-mail is delivered. This address is
used in replies.
Send Log To Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To Type the e-mail address to which alerts are delivered.
Sending Log Select how often log information is e-mailed. Choices are: When Full, Hourly and
When Full, Daily and When Full, and Weekly and When Full.
Day for Sending This field is available if the log is e-mailed weekly. Select the day of the week the log
Log
is e-mailed.
Time for Sending This field is available if the log is e-mailed weekly or daily. Select the time of day
Log
(hours and minutes) when the log is e-mailed. Use 24-hour notation.
Chapter 44 Log and Report
ZyWALL/USG Series User's Guide
884