The Ssl Inspection Screens - ZyXEL Communications ZyWALL 110 User Manual

Table 66 Monitor > UTM Statistics > Anti-Spam > Status (continued)
LABEL
Total Queries
Avg. Response Time (sec)
No Response
DNSBL Statistics
#
DNSBL Domain
Total Queries
Avg. Response Time (sec)
No Response

6.23 The SSL Inspection Screens

The ZyWALL/USG uses SSL Inspection to decrypt SSL traffic, sends it to the UTM engines for
inspection, then encrypts traffic that passes inspection and forwards it.
Click Monitor > UTM Statistics > SSL Inspection > Report to display the following screen.
Figure 127 Monitor > UTM Statistics > SSL Inspection > Report
Chapter 6 Monitor
DESCRIPTION
This is the total number of queries the ZyWALL/USG has sent to this service.
This is the average for how long it takes to receive a reply from this service.
This is how many queries the ZyWALL/USG sent to this service without receiving a
reply.
These are the statistics for the DNSBL the ZyWALL/USG uses. These statistics are
for when the ZyWALL/USG actually queries the DNSBL servers. Matches for
DNSBL responses stored in the cache do not affect these statistics.
This is the entry's index number in the list.
These are the DNSBLs the ZyWALL/USG uses to check sender and relay IP
addresses in e-mails.
This is the total number of DNS queries the ZyWALL/USG has sent to this DNSBL.
This is the average for how long it takes to receive a reply from this DNSBL.
This is how many DNS queries the ZyWALL/USG sent to this DNSBL without
receiving a reply.
ZyWALL/USG Series User's Guide
150