Dimming; Calibration Of The Ccd - Barco SIM 5W User Manual

7.11.4 Dimming

Overview
•

Calibration of the CCD

• Calibration of ECR
• Resetting the ECR
7.11.4.1 Calibration of the CCD
What can be done?
This procedure is meant to calibrate the dimmer: the dimmer is set to its reference positions.
How to start the Dimmer Reference Positions dialog box?
1. Press the MENU key to activate the Menu bar
2. Push the cursor key ← or → to highlight Service in the menubar
3. Push the ↓ key to pull down the Service menu
4. Push the cursor key ↑ or ↓ to highlight Dimming
5. Push the → key to pull down the Dimming menu
6. Push the cursor key ↑ or ↓ to select Calibrate CCD... and press ENTER to select.
Image 7-233
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
CCD
Constant Contrast Dimmer: this is an optical module which transmits only part of the light beam that comes in on it.
Contrast does not change.
C :
AUTION Changing these settings may seriously affect the performance of the projector.
7. Advanced
177