Battery Installation In The Rcu - Barco SIM 5W User Manual

4. Installation
Image 4-1
4.1

Battery installation in the RCU

How to install the battery
Two batteries are packed together with the RCU. Before using your RCU, install first these batteries.
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU.
4. Put the battery cover on its place.
How to replace the batteries in the RCU
To replace the batteries :
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the battery towards the - side
4. Lift up the battery at the same time.
16
Downloaded From projector-manual.com Barco Manuals
Length with different lenses : see table
Cold air IN Cold air IN
487 (length without Cable Basket)
380
45
R59770324 SIM 5W 22/12/2011