9. Service mode
Start Up
1. Push the cursor key ↑ or ↓ to higlight Lamp Run Time History. (menu 9-18)
2. Press ENTER to display the Lamp Run Time overview. (menu 9-19)
A listing with the lamp serial number and the corresponding run time will be displayed.
The actual installed lamp will be marked.
3. Press ENTER to return to the service mode selection menu.
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-18
9.10 Lamp Dimming
What can be done?
The lamp can be dimmed via the lamp dimming feature.
Start Up
1. Push the cursor key ↑ or ↓ to highlight Lamp Dimming. (menu 9-20)
2. Press ENTER to select.
3. Push the cursor key ← or → to dim the lamp.
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-20
9.11 BARCO Logo
What can be done?
The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen.
82
Downloaded From projector-manual.com Barco Manuals
SERVICE
LAMP RUNTIME HISTORY
Serial No
> 011121
011098
011054
000000
000000
000000
--------------------------
MORE...
<ENTER> for detail
<EXIT> to return
Menu 9-19
SERVICE
MORE...
A projector starts always with full lamp power.
Runtime
600 h
800 h
1000 h
0 h
0 h
0 h
R5976182 BARCOREALITY 6500 30012001