7. Advanced
Image 7-151
6. Use ↑ or ↓ to position the Menu bar
7.9.4
Status bar position
What can be done ?
The status bar (wizard menu) can be centered vertically , the range being from bottom of the screen to the middle of the screen.
This can be useful in applications where the bottom image content is not displayed ( soft edge region).
How to center the menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Status bar position
Image 7-152
5. Press ENTER
6. Use ↑ or ↓ to position the status bar
7.9.5
Slider box position
What can be done ?
The slider box function allows to display or hide the different boxes used for instance for picture settings (contrast, ...).
How to reposition the slider box?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
132
Downloaded From projector-manual.com Barco Manuals
R59770324 SIM 5W 22/12/2011