Image; Image Settings; Setting The Contrast; Setting The Brightness - Barco SIM 5W User Manual

7.4

Image

Overview
•

Image settings

• Gain control on Video
• Aspect ratio
• Input balance (RGB signals only)
• Passive Infitec
7.4.1 Image settings
7.4.1.1

Setting the Contrast

Contrast adjustments
Adjust the contrast to "brighten" the white parts of the image.
How to change the Contrast
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Contrast
7. Press ENTER
On the screen appears now a slider box
Image 7-9
8. Use ←or → , the numeric keys on the remote, or the keypad to change the contrast
7.4.1.2

Setting the Brightness

Brightness adjustment
Adjusting the brightness will affect the dark areas of the image. Increase the brightness to "lighten" up the parts that are too dark.
How to change the Brightness
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Brightness
7. Press ENTER
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
TM (Optional)
It is recommended to adjust the brightness before adjusting the contrast.
7. Advanced
59