Source Selection; Composite Video - Barco SIM 5W User Manual

Table of Contents

Advertisement

7.3

Source selection

Overview
Source selection

Composite video

S-Video
RGB-YUV
PC
DVI
7.3.1
Source selection
Selecting a source
The Source selection menu allows to select one of the different inputs. Anotherway to select an input source is via the remote control
using the numeric keys or by using the local keypad.
Selecting a source from the menu bar (OSD) will always display that source in a full screen mode.
The source names in the menu bar are adapted automatically depending on the type of boards installed in the projector. For example
:
L1 DVI
L2RGB-YUVI
...
In this case, a DVI board is installed in the first layer (L1), a RGB-YUV board is installed in the second layer (L2) ,...
7.3.2
Composite video
When
Select composite video when you are in presence of a PAL or NTSC video signal.
A composite video signal is often available on a yellow cinch connector of a Camera, VCR or DVD player.
How to select the composite video input ?
1. Press MENU to activate the Tool bar
2. Press ↓ to Pull down the Source Selection menu
The menu will contain one item Lx Video, x being the layer on which the composite video is connected (for example L2 Video if
the signal is connected to layer 2)
3. Use ↑ or ↓ to select Lx Video
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
In some cases an alphanumeric value (file name, ...) has to be entered. Use ↑ or ↓ to scroll through the char-
acter values once the input field is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz
When selecting a source with a different aspect ratio than the projector's native aspect ratio, the source can
be shown in its native resolution or can be re-scaled to the projector's resolution, the latter case brings of
course some loss of quality.
This projector has a native resolution of 1920 x 1200 pixels, which is an aspect ratio of 16:10.
7. Advanced
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents