Air Pressure - Barco SIM 5W User Manual

How to set the factory settings ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Reset factory settings ...
Image 7-248
5. Press ENTER
The settings are set to factory defaults

7.11.9 Air pressure

What can be done ?
Projector cooling can be adapted to meet high altitude applications. The fan speed can be adjusted in function of the altitude (thus
the air pressure). The environmental pressure or reference for the fan speed can be determined in 2 different ways :
1. by setting manually the environmental pressure
2. by using the internal sensor
How to set the air pressure manually ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Air pressure ...
Image 7-249
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
7. Advanced
185