Manual Time Of Day - Barco SIM 5W User Manual

The Time of Day presets dialog box will be displayed.
Image 7-129
7. Use the cursor keys ↑, ↓, ← or → , the numeric keys on the RCU, or the local keypad, to set the Constant Contrast Dimmer
(CCD) and the Extended Contrast Ratio (ECR) to the desired value.
Note: The ECR column is not visible on projectors without the Night Vision option!
8. Press ENTER to confirm the new dimmer preset settings.
9. Press BACK to return to the Lamps menu.
7.7.4.3

Manual Time of Day

What can be done?
In projectors having the Night Vision option, it is possible to manually set a Time of Day value. However, In case CLO mode has
been set to ON, the projector will be set to the target value of Time of Day in the CLO menu instead of the Manual Time of Day value.
How to manually set the Time of Day?
1. Press the MENU key to activate the Menu bar
2. Push the cursor key ← or → to highlight Lamps in the menubar
3. Push the ↓ key to pull down the Lamps menu
4. Push the cursor key ↑ or ↓ to highlight Dimming Control
5. Push the → key to pull down the Dimming Control menu
6. Push the cursor key ↑ or ↓ to select Manual Time of Day... and press ENTER to select.
Image 7-130
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
This menu item will be greyed out if the Night Vision options is not present.
7. Advanced
121